portfolio

Single Layer PCB

 A single-layer or single-sided PCB is one that is made out of a single layer of base material or substrate. One side of the base material is coated with a thin layer of metal. Copper is the most common coating due to how well it functions as an electrical conductor.

  • Thickness of 0.2 to 3.2mm (with finish copper of 2 oz)
  • Line width and spacing of 6 / 6 mils
  • Minimum drilled hole of 0.35mm
  • Minimum punched hole of 0.9mm
  • Finish of UVSM / PISM with lead and lead free hot air leveling.

DOUBLE SIDED (PTH & NON-PTH) PCB

Double- layer or double-sided PCBs have a base material with a thin layer of conductive metal, like copper, applied to both sides of the board. Holes drilled through the board allow circuits on one side of the board to connect to circuits on the other.

  • Thickness of 0.2 to 3.2mm (with finish copper of 2 oz)
  • Line width and spacing of 6 / 6 mils
  • Minimum drilled hole of 0.35mm
  • Minimum punched hole of 0.9mm
  • Finish of UVSM / PISM with lead and lead free hot air leveling.

ALUMINIUM CLAD (METAL CORE) PCB

Double- layer or double-sided PCBs have a base material with a thin layer of conductive metal, like copper, applied to both sides of the board. Holes drilled through the board allow circuits on one side of the board to connect to circuits on the other.

  • Thickness of 0.2 to 3.2mm (with finish copper of 2 oz)
  • Line width and spacing of 6 / 6 mils
  • Minimum drilled hole of 0.35mm
  • Minimum punched hole of 0.9mm
  • Finish of UVSM / PISM with lead and lead free hot air leveling.